
Designlight Scandinavian AB
About us
The lighting company Designlight Scandinavian AB, a wholesale and manufacturing company based in Moheda, was started in 1996 by the couple Björn & Jessica Hultqvist.
DESIGN
The company has developed into one of the leaders in LED lighting. All products are developed and designed by DESIGNLIGHT SCANDINAVIAN AB. Because we develop ourselves and manufactures the products, we have full control over the entire manufacturing process. It should be simple and above all safe to install our lighting. Innovative product series are the result of a good dialogue between electrical professionals and us as a luminaire manufacturer.
QUALITY
We are very careful with the choice of raw materials for our luminaires for longer durability, safety and highest quality. Designlight has a number of own brands where quality and smart solutions for installers and users is a success factor, which has received a great deal of attention in the industry.
ENVIRONMENT
Designlight is constantly striving to develop services and products that are customized for the environment. We do this by using renewable resources in such closed cycles as possible and by avoiding the use of pollutants and thereby prevent pollution.
Products & services

Liny I25-1200
Liny is a flexible, low-profile IP44 LED all-round luminaire. Turn on/off. Selectable effect and light flow. Choice of color temperature 3000K or 4000K. Preset at 4000K and 40W. Mounted in the ceiling or on the wall, (IP40). Thanks to easy opening of the gables, so installation time can be minimized. Prismatic cup (PMMA), patented regular hexagon microprismatic which provides even light distribution and good protection against glare. Frosted film attached. Frame in white lacquered sheet steel. Sliding end caps made of impact-resistant plastic. IK07 D-marked Interconnectable 2.5 mm² with 5-pin terminal block at each end. Cable entry via ends, as well as two holes on the back. Also available with sensor (I25-1200S) and in 600 mm and 1500 mm length.

Liny I25-1200S
Industrial luminaire 3000K/4000K 40W Sensor Liny is a flexible, low-profile IP44 LED all-round luminaire. With sensor, Microwave. Selectable effect and light flow. Choice of color temperature 3000K or 4000K. Preset at 4000K and 40W. Mounted in the ceiling or on the wall, (IP40). Thanks to easy opening of the end panels, installation time can be minimized. Prismatic cup (PMMA), patented regular hexagon microprismatic which provides even light distribution and good protection against glare. Frosted film attached. Frame in white lacquered sheet steel. Sliding end caps made of impact-resistant plastic. IK07 D-marked Switchable 2.5 mm² with 5-pin terminal at each end. Cable entry via ends, as well as two holes on the back. You can slave connect up to 7 Liny without a sensor to this fixture and thus have the sensor activate lights for a larger area. Also available without sensor (I25-1200) and in 600 mm and 1500 mm length.

Izzy TZI-18D
Slim elegant plafond. Dimmable. 18W, 1500 lumens. Adjustable light color 3000K, 4000K or 6000K. IP44. A number of mounting options: semi-recessed with spring-loaded brackets, (adjustable hole drilling 65-180 mm when recessed). Installation on a thick ceiling or directly in a ceiling box. Must not be covered with combustible material. Safety wire between frame and cup for safer mounting. The plafond can be mounted on the ceiling or on the wall. Spread angle 110 degrees. PC frame and dome in PMMA. CRI>80. IK03. L70B80: 35,000H

Izzy TZI-12/15/18W PIR
Slim elegant plafond, with PIR sensor. Adjustable power - Lumen: 12W: 1000~1200/15W: 1300~1500/18W: 1500~1800lm. Adjustable light color 3000K, 4000K or 6000K. Turn on/off. Dip-switch 4 different setting possibilities. IP20. A number of mounting options: semi-recessed with spring-loaded brackets, (adjustable hole drilling 65-180 mm when recessed). Installation on a thick ceiling or directly in a ceiling box. Must not be covered with combustible material. Safety wire between frame and cup for safer installation. The plafond can be mounted on the ceiling or on the wall. Spread angle 110 degrees. PC frame and dome in PMMA. CRI>80. IK03. L70B80: 35,000H The luminaire turns on automatically when movement comes within the detection area and turns off after a set time when movement is no longer noted. Detection surface - see product manual. Cable entry 2-pole quick connection

Roundy TLE-15, TLE-18, TLE-24 - 3000/4000/5000K
Roundy ceilings are available in 3 sizes and can be installed on the wall/ceiling and provide a wide light pattern suitable for basic lighting/general lighting. Light color can be set between 3000/4000/5000K to suit your needs. Depending on the variant 15W, 18W, 24W, the luminaire gives between 1106 lm - 2357 lumen. Roundy is an installation-friendly luminaire with inputs/outputs for cable entry from two sides or from the back of the luminaire. Distances between the fixture's screw mounts are adapted to suit installation in appliances (60 mm) and ceiling boxes (70 mm). The fixture is IK10 rated and is suitable for locations that require high impact resistance.

Plafond Roundy TLE-18S 18W
Roundy plafonds P54 can be installed on walls/ceilings and provide a wide light pattern 110° dispersion angle, CRI>80, which is suitable for basic lighting/general lighting. Color temperature can be set between 3000/4000/5000K to suit your needs. Depending on the light setting, the luminaire provides a full 1844/2102/2056 lumens. Roundy is an installation-friendly fixture with inputs/outputs for cable entry from two sides or from the back of the fixture. Distances between the fixture's screw mounts are adapted to suit installation in appliances (60 mm) and ceiling boxes (70 mm). The fixture is IK10 rated and is suitable for locations that require high impact resistance. Ø 270 mm. Settings the lamp's microwave sensor; Detection area: Here you can set the sensor's sensitivity in 4 different modes (25, 50, 75 or 100%) Hold time: How long the luminaires must be lit from the last recorded movement (5s, 90s, 3 min or 10 min) Daylight sensor: At which ambient light the sensor should be active (the lights should be lit) 5, 15, 50 Lux or inactive Slave connection of luminaires: Connect a maximum of 4 luminaires in the "Roundy" series after a TLE-18S. • Microwave sensor • Easy to install • Low energy consumption • Fits ceiling box • Slim design • Flexible cable entries

PSH-4CCTMW Yrrol Downlight 4CCT
Yrrol - tiltable white downlight equipped with LED, 6.5 W which is adjustable in four different color temperatures - 2700K/3000K/4000K/5700K. The color temperature is adjusted with a simple push of a button and the light flux in the different levels is 522 lm/545 lm/575 lm/570 lm. (Default to 3000K). Driver are included with each lamp on delivery and for dimming, a dimmer for the trailing edge must be used. Yrrol's driver is equipped with quick connections for 16 mm flex wire.. Yrrol is approved for mounting directly against insulation and has protection class IP65. Approved for mounting both indoors and outdoors.

PSH-4CCTB Yrrol Downlight 4CCT Black
Yrrol - tiltable black downlight equipped with LED, 6.5 W which is adjustable in four different color temperatures - 2700K/3000K/4000K/5700K. The color temperature is adjusted with a simple push of a button and the light flux in the different levels is 522lm/545 lm/575 lm/570 lm. (Default to 3000K). Driver are included with each lamp on delivery and for dimming, a dimmer for the trailing edge must be used. Yrrol's driver is equipped with quick connections for 16 mm flex wire. Yrrol is approved for mounting directly against insulation and has protection class IP65. Approved for mounting both indoors and outdoors.

Elly - Floodlight strålkastare
Elly an efficient spotlight with high quality. Available in 7 different variants from 10 watts to 200 watts, 20 watts also available with PIR sensor. The products in the Elly series are specially treated with fade-resistant powder coating and withstand ambient temperatures between -30 to +40°C. CRI80 and can be used both indoors and outdoors (IP65). Light temperature; 4000K. D-marked The larger models are compatible with 1-10V.