
Dictator Scandinavia AB
Products & services

DICTATOR Door Check R 1400
DICTATOR Door Check R 1400 For Mounting on the Closing Face of the Door. The R 1400 door damper is especially designed to cope with situations where unobtrusive mounting on the closing face of the door is wanted or required for optical or practical reasons. All R 1400 door checks are furnished with a special cylinder which allows vertical and horizontal mounting. Usually the R 1400 is mounted directly at the closing edge of the door. Therefore, mostly the 20 N spring is used to make sure the door can easily be opened. Normally the hook of the R 1400 is mounted to the frame from below or horizontally to its side. In case of flush aluminium or plastics frames, however, there exists another possibility. Using a special mounting bracket, the hook can be mounted on the frame (see illustrations on the next page). The R 1400 door check can be used on exterior and interior doors. For outdoor applications or in humid areas there are available models in stainless steel. If stainless steel is required for optical reasons only, we also furnish a more economic version with zinc-plated steel cylinder.

DICTATOR Gate Closer DIREKT
The DICTATOR gate closer DIREKT is the economic solution for the reliable and controlled closing of outside gates, such as admission gates to kinder gardens (thus preventing the children from running out into the street), schools, industrial plants or just normal garden entrance doors. Unlike a normal closing spring the gate is not thrown shut. The gate closer DIREKT reduces the danger of injuries and accidents, e.g. pinched fingers, and prevents the gate from hitting the person just passing through the gate. It is as easy to install as a normal closing spring. But unlike the normal closing springs its closing speed can be adjusted continuously. Depending on the gate and the hinges you either use the DIREKT 150 or the DIREKT 200. The gate closer DIREKT can be installed on gates with normal, ascending and screw hinges.

DICTATOR Door and Gate Closer RTS
The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The DICTATOR RTS tube door closer is often used on outside gates such as garden entrance gates, admission gates into industrial plants. These gates usually do not have a frame above the door where the operating lever of a normal overhead door closer could be fitted. Furthermore the concealed fitting protects the door closer from atmospheric conditions and against vandalism.

DICTATOR hydraulic Back Check
The DICTATOR back checks with hydraulic damping slow down hinged doors opening too fast and limit the opening angle of the door. Thus they prevent damage to the doorand the hinges. The door can effortlessly be moved by hand. The cushioning of the back check prevents too high opening speed of the door e.g. by a sudden gust of wind.